Multinautic R-450 Foam Filled Dock Float

• Filled with premium-quality closed cell (EPS) at 0.4 to 0.5 kg (0.9 to 1.2 lb.) per cubic foot.
• Easy to install or modify on new or used docks using hexagonal bolts or lag bolts and large flat washers (not included) underneath the frame so both lumber and dock hardware stay out of the water.
• This float has 204.1 kg (450 lb.) of floatability capacity.
• When the right amount of floats is installed to reach a calculation of 11.34 kg (25 lb). per square foot of buoyancy, this float model gives a medium freeboard of approximately 40.64 cm (16 in.)
• The simplest, most effective solution for replacing old barrels and foam on wood docks.
• Will not leak or contaminate water, even if perforated.
• Choice of 8 bolt locations for easy mounting under the dock.
• Rotationally molded for one-piece, seamless construction, with a minimum wall thickness of 3.8 mm (0.150 in.).
• Resistant to animal damage and deterioration from contact with petroleum products.
• Required installation hardware (not included): 3/8 in. lag screws (on wood docks) or hex bolt with 4.44 cm (1.75 in.) large flat washers.
• Usually, 4 fasteners are enough to secure the float

Specifications:

• Dimensions.(L × W × H): 61 cm × 122 cm × 30.5 cm (24 in. x 48 in. x 12 in.)
• Weight: 15.4 kg (34 lb.)
• Capacity: 204.1 kg (450 lb.) of buoyancy